By Carmelo Paone | Owner & Founder, RMG Tiling & Bullnose
For outdoor paving, 20mm is the standard porcelain paver thickness, and it covers most residential uses, from patios and pool surrounds to pathways and driveways. The thickness itself rarely changes between a patio and a driveway; what changes is how the paver is laid. A patio can take 20mm pavers on a range of beds, including pedestals, compacted gravel, sand or adhesive, while a driveway needs those same 20mm pavers laid on a solid, fully supporting concrete bed so they can carry vehicle loads without flexing. Thinner pavers (around 10mm) are made for walls and interiors, not freestanding outdoor paving. So the short answer is 20mm for outdoors, with the base doing the heavy lifting on a driveway.
What thicknesses do porcelain pavers come in?
Porcelain for walls, floors and cladding is made in several thicknesses, but for outdoor paving three come up most. Thin gauged panels around 6mm are used for cladding and walls. Standard tiles around 10mm suit interior floors and adhered applications. For outdoor pavers that sit in a landscape, 20mm is the workhorse: thick enough to be laid loose on pedestals or granular beds, strong enough for foot traffic, and the thickness almost every outdoor porcelain range is produced in. Some manufacturers also offer 30mm for heavy-duty or commercial vehicular use.
| Thickness | Typical use |
| 6mm (gauged panel) | Wall cladding and facades |
| 10mm | Interior floors and adhered applications |
| 20mm | Outdoor pavers: patios, pool surrounds, pathways, residential driveways |
| 30mm | Heavy-duty and commercial vehicular areas |
What thickness suits a patio?
For a patio, alfresco or pool surround, 20mm is the answer, and part of its appeal is the flexibility of installation. A 20mm paver can be dry-laid on a pedestal system over a membrane, bedded on compacted gravel or sand for a permeable finish, or fixed with adhesive on a concrete slab. That versatility is why 20mm has become the default for outdoor living areas, where it can also meet the pool edge, finished with bullnose pool coping. You do not need anything thicker for pedestrian spaces; 20mm handles foot traffic, furniture and the usual outdoor use comfortably.
What thickness do you need for a driveway?
Here is where people expect a thicker paver, but the answer is usually still 20mm, with the critical difference being the base. For a residential driveway, 20mm porcelain pavers are laid on a full, rigid, fully supporting bed, typically bonded with adhesive onto a properly prepared concrete slab, so a vehicle’s load is spread evenly and nothing is left to span unsupported. What you must not do is put pavers meant for a patio pedestal system under a car. For heavier vehicles or commercial use, a thicker paver (such as 30mm) or specific engineering may be required, so it is worth confirming the manufacturer’s rating for vehicular loads.
Can you drive a car on 20mm pavers?
Yes, provided they are laid correctly. A 20mm porcelain paver has a high breaking load and will comfortably carry a domestic car when it is fully bedded on a solid concrete base, because the base supports the whole underside and the paver is never asked to bridge a gap. The same paver laid on pedestals or loose sand, as you might for a patio, is not suitable for a vehicle, since an unsupported paver can crack under a concentrated point load like a tyre. In other words, it is the combination of the right thickness and the right base that lets you drive on porcelain, not thickness alone.
Why the base matters as much as the thickness
It is tempting to think a thicker paver is automatically a stronger one, but on site the bedding does at least as much work. Porcelain is very strong when it is fully and evenly supported; it is far more vulnerable to a point load over a void or a soft spot. A well-prepared, level, fully supporting base lets a 20mm paver perform to its rating, while a poor base can crack even a thick paver over time. This is why the installation specification matters as much as the number on the box, and why driveways in particular live or die on their preparation.
Frequently Asked Questions
How thick should porcelain pavers be?
For outdoor paving, 20mm is the standard and suits patios, pool surrounds, pathways and residential driveways. Thinner 10mm pavers are made for interiors and walls, not freestanding outdoor use.
Can you drive a car on 20mm pavers?
Yes, as long as the 20mm pavers are laid on a solid, fully supporting concrete bed. They are not suitable for vehicles when laid on pedestals or loose sand, where an unsupported paver can crack under a tyre.
What thickness suits a patio?
20mm. It handles foot traffic and furniture easily and can be laid on pedestals, gravel, sand or adhesive, which makes it the flexible default for patios and outdoor living areas.
Are 20mm pavers strong enough for a driveway?
Yes, for residential vehicles when bonded to a properly prepared concrete slab so the load is fully supported. For heavier or commercial vehicles, a thicker paver or specific engineering may be needed, so check the manufacturer’s vehicular rating.
In short, 20mm is the porcelain paver thickness you need for almost every outdoor job, patio or driveway alike. The difference is in the bed beneath it: a patio gives you flexible options, while a driveway needs a solid, fully supporting base so those 20mm pavers can take the weight of a car. You can see the full outdoor range on our Melbourne porcelain pavers page, and because pavers almost always need cutting to fit borders, steps and edges, that precision work is handled through our tile cutting services.